I have installed a Geothermal system and wanted to make sure that i am using it in an efficient manner.
The system engineer did not install the necessary monitoring tools, therefore, i wanted to find cheap and easy to use Flow meters. I search on Amazon and found about a suite of devices provided by TmallTech.
It was not a plug and play setup because in order to do the calculation correctly, you need some manufacturer information. I was disappointed that the manufacturer did not send any data sheet about the product. I googled such data sheet to no avail. The piece of information that you would need is called the K factor. the K factor lets you convert the pulse that the hall effect sensor to flow. The K factor depends on the device and its diameter!
After lots of research and calibration, i arrived to a suitable solution
First You need to read the Hall Effect sensor reading. for that you can do one of the following
1) Buy a Digital Tachometer Gauge RPM. A bought a good one from amazon called
The system engineer did not install the necessary monitoring tools, therefore, i wanted to find cheap and easy to use Flow meters. I search on Amazon and found about a suite of devices provided by TmallTech.
It was not a plug and play setup because in order to do the calculation correctly, you need some manufacturer information. I was disappointed that the manufacturer did not send any data sheet about the product. I googled such data sheet to no avail. The piece of information that you would need is called the K factor. the K factor lets you convert the pulse that the hall effect sensor to flow. The K factor depends on the device and its diameter!
After lots of research and calibration, i arrived to a suitable solution
First You need to read the Hall Effect sensor reading. for that you can do one of the following
1) Buy a Digital Tachometer Gauge RPM. A bought a good one from amazon called
DROK® 0.56" Digital Tachometer Gauge RPM Speed Measure Gauge Meter DC7~30V Tester Velocimeter 60-9999 RPM with Red Display for 14 USD ..
http://www.amazon.com/gp/product/B00L42TNI8/ref=s9_simh_gw_g469_i1_r?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=desktop-1&pf_rd_r=1NQ4JZKQ09HY2FAH0FPR&pf_rd_t=36701&pf_rd_p=2079475242&pf_rd_i=desktop
2) Use Arduino kit to connect the hall effect sensor to it and do a little bit of programming or googling
3) Use a reading device that is designed to work with hall effect flow meter. I bought one, but also it comes with no user guide and therefore , was not able to change the K factor to be suitable for the device i am using. So I do not recommend this options
Actually, the first option proved to be the most accurate and viable option.
By the way, you need a power source to supply both the flow meter and the Tachometer.
The entire success of the story depends on Knowing the K factor.
Below you can find the K factor for devices suppled by TmallTech
The following table will help you find flow meter reading
from hall effect pulse rates
|
Size
|
Pulse per Lit
|
Formula frequency = K *
Q(Lit/min)
|
Case Study, pulse/min
|
Flow lit / min
|
1
|
G2 inch
|
12
|
Pulse per min/60 = 0.2 * Q
|
1200
|
Q=1200/60/0.2=100 L/min
|
2
|
G 1 1/2 inch
|
30
|
Pulse per min/60=0.5 * Q
|
2700
|
Q=2700/60/0.5=90 L/min
|
3
|
G 1.0 inch
|
288
|
Pulse per min/60=4.8*Q
|
1800
|
Q=1800/60/4.8=6.25 lit/m
|
4
|
G ¾ Inch
|
330
|
Pulse per min/60=5.5*Q
|
2000
|
Q=2000/60/5.5=6 lit/min
|
5
|
G ½
|
450
|
Pulse per min/60=7.5Q
|
1600
|
Q=1600/60/7.5=3.5 lit/min
|
For example let us take the 2 inch case
Measuring the pulse rate using a device from amazon called
DROK®
0.56" Digital Tachometer Gauge RPM Speed Measure Gauge Meter DC7~30V
Tester Velocimetry 60-9999 RPM with Red Display
The
device measured 1200 pulse/min
The
manufacturer specification is that the flow meter generates 12 pulse per lit
Therefore,
the Frequency HZ (pulse/second) is 1200/60=
20 Hz
Therefore,
the flow per second is 20hz/12 =
1.66 lit/second
Applying
the formula above gives the same result
Q
= pulse per min/60 / 0.2 è pulse/second
/0.2 è
pulse/second /12/60 è
20/0.2=100 lit/second
ð
100/60 è
1.6 lit/min
jaydi